read new nonstop follow 87041 28-APR 16:48 Programmers Den RE: Real Make... (Re: Msg 87036) From: RHELLER To: NIMITZ I did not see it here or on chestnut (last time I checked (but I only snarfed the ls-lR file, so if it was uploaded recently, I'd have missed it)). Robert -*- 87042 28-APR 16:56 Programmers Den RE: Real Make... (Re: Msg 87036) From: RHELLER To: NIMITZ lucy.ifi.unibas.edu is not known domain. Do you have a filename for GNU Make on chestnut? The only make is make.ar in the OS9 (6809) section. There is makeinfo and m4 in the /pub/OSK/GNU directory on chestnut.cs.uwisc.edu. Robert -*- 87043 28-APR 20:44 Programmers Den RE: Real Make... (Re: Msg 87042) From: NIMITZ To: RHELLER I'm sorry, try lucy.ifi.unibas.CH. -*- 87045 28-APR 21:58 Programmers Den RE: Real Make... (Re: Msg 87042) From: KSCALES To: RHELLER Hi, Robert - > lucy.ifi.unibas.edu is not known domain. I think this should be "lucy.ifi.unibas.ch". I ftp'ed over there during the Christmas break. Don't know offhand if there is a version of 'make' available there or not. Cheers... / Ken -------------------------------------------------------------------------- Ken Scales Delphi:KSCALES Internet:kscales@delphi.com CIS:74646,2237 -*- 87074 30-APR 19:14 Programmers Den RE: Real Make... (Re: Msg 87041) From: JOHNREED To: RHELLER (NR) > I did not see it here or on chestnut (last time I checked (but I only snarfed > the ls-lR file, so if it was uploaded recently, I'd have missed it)). I saw it (GNU-Make) on wuarchive.wustl.edu -- along with a huge herd of other GNUs. ******************************** "Don't take life too serious - it ain't nohow permanent" (Pogo) John R. Wainwright <> <> -*- End of Thread. -*- 87044 28-APR 21:38 Programmers Den RE: GCC2 ver 2.5.8 (Re: Msg 86985) From: KEITHBAUER To: NIMITZ David > Keith, those are indeed in another file, somehow DELPHI got the idea I > was done with this upload before I was. In fact, Paul just broke into my Okay, I will look for the rest this weekend. By the way here is my MM/1 setup: 8 Meg using the new back plane /h0 213 meg Maxtor Hard drive /d0 3-1/2 1.4mg /t0 /t2 Dexxa Mouse /t3 /t4 14.4K modem 8CM815 Monitor Panasonic 9 Pin KX-P1180 printer See ya Keith Bauer CIS:71102,317 Delphi:keithbauer Internet:kbauer@pids.com Via InfoXpress/OSK ver 1.01 How 'bout them Cowboys! -*- 87046 28-APR 22:59 General Information RE: Current Periodicals (Re: Msg 87037) From: JEVESTAL To: DSRTFOX (NR) > There are a lot of patches and such to wade through, so much so that I > came out with an "upgrade" disk that many have referred to as "Level II > version 2" though it isn't that officially. What it is is a collection of > the most used/needed/recommended patches for Level II all on awo disk set > that gas (has!!) an auto-patch util with it. Answer a few questions and > the patches are installed! All you do then is edit the supplied bootlist > to your liking and run OS9Gen. You need 2 DS40T drives (at least1... the > other can be 80T) to run the autopatch feature, also 512K. The disk set is > $7.50 + $2.50 S&H, or you can get it from FARNA Systems at the fest in > Chicago. I thought that Patch09 was a CoNect product and I think Rick sells it for only $3.50 or something like that. Jim -*- 87047 29-APR 07:07 General Information classifieds From: DGANTZ To: ALL Just a friendly little reminder, and a friendly request (to save us all online time). If you have a posted classified in the classified section and the item or items have been sold, please update or remove your classified. If need help consult EDDIEKUNS or MITHLEN, they manage our databases, but may be able to advise on the updating or removal of classifieds. Last time I checked out the classifieds (prior to today) I found out that 80 to 90% of what I wanted to buy was sold months to 2 years prior. And there I was stuck with an investment in online time and nothing to show for it. DGANTZ -*- 87048 29-APR 09:52 General Information RE: classifieds (Re: Msg 87047) From: ILLUSIONIST To: DGANTZ (NR) Marty Goodman will be deleting all classifieds older than 3 months very soon.. -*- 87053 29-APR 22:24 General Information RE: classifieds (Re: Msg 87047) From: MRUPGRADE To: DGANTZ (NR) I call it theh barn door syndrome. Most every one closes it on th way in,, and leaves it swinging in theh breeze as they exit. assifieds here are a great bonus for all Delphi users. After they've helped you,, please help others by askin theh item be removed. That makes them much more realistic,, andn many will rely on them. Sorry,, but I hate the doors left swinging,,, just cause somone's no longer needing theh barn for them selves. Til then,,, Terry Simons -*- End of Thread. -*- 87049 29-APR 19:35 Telecom (6809) Loading SC to another window From: CHARLESAM To: ALL I'm having a problem loading supercomm into a given window from startup. I've tried SC >/w1, SC <>/w1, SC <>>>/w1, SC <>>>/w1&. None work. If any one here has a solution I'd be appreciative to hear it. Of course I use supercomm, not SC, but its the redirection I can't master. If I can load supercomm into a window from a script file, I can load anything else. No, thats a lie! I can't load DMTree from scriptfile either, but I believe thats the nature of DMTree. Thanx Charlie -*- 87054 29-APR 22:26 Telecom (6809) RE: Loading SC to another window (Re: Msg 87049) From: COLORSYSTEMS To: CHARLESAM (NR) Try sc <>>>/w& ------------------------------------ Zack C Sessions "We did not inherit the Earth from our Ancestors, we borrowed it from our descendants." Ancient proverb -*- End of Thread. -*- 87050 29-APR 21:41 General Information RE: patches (Re: Msg 87027) From: ROBERT84 To: NEALSTEWARD I have contacted them before about the program. They said they don't even have anyone there familiar with it anymore, and could not help me. How do you like that. Thanks, Bob -*- 87051 29-APR 22:18 General Information RE: patches (Re: Msg 87050) From: NEALSTEWARD To: ROBERT84 I will make an effort to contact the author and see if he will support it anymore, and if he can arrange for another distributor since it is THE BEST word processor I have even seen for coco os9. -*- 87064 30-APR 16:13 General Information RE: patches (Re: Msg 87051) From: DBREEDING To: NEALSTEWARD (NR) RE: Word processor from OwlWare > I will make an effort to contact the author and see if he will support it > anymore, and if he can arrange for another distributor since it is THE > BEST word processor I have even seen for coco os9. I have Bob Van Der Poel's ved/vpt combo. Not familiar with the w/p you speak of, but this setup can really put out some great text. This is a separate text editor/Text Formatter combo (vpt could work with any text editor), but I am really impressed. You may have to set up your own vpt..init file, (something like a printer descriptor file, although examples for several printers are included), but when you get it set up, you can produce some really fabulous text. The control codes may be a little ambiguous, but they work. I understand Bob was the writer of Telewriter 64/128. -- David Breeding -- CompuServe : 72330,2051 Delphi : DBREEDING *** Sent via CoCo-InfoXpress V1.01 *** ^^^^ ^^^^^^^^^^ -*- 87066 30-APR 16:20 General Information RE: patches (Re: Msg 87064) From: MITHELEN To: NEALSTEWARD (NR) Wait, word processor from OwlWare... That would be WindoWriter? You're kidding when you say it is the BEST you have ever seen for OS-9... right? The only thing I found of vaule in that package was the ram disk... -*- 87077 30-APR 22:15 General Information RE: patches (Re: Msg 87051) From: ROBERT84 To: NEALSTEWARD (NR) I would really appreciate that, I have the docs for version 1.2, and a disk with a serial number on it if that is what he would need to know that I have a real copy of the program. I really appreciate your help. Thanks, Bob -*- End of Thread. -*- 87052 29-APR 22:23 General Information Boot Problem From: NEALSTEWARD To: ALL HELP!!! I can't figure this one out... When I os9gen a bootdisk, mount it in drive 0 and type DOS, the read heads move to track 34 and the OS9 BOOT message appears as it should. The problem I am having is that it immediately goes to the hard drive to finish the boot process and will not allow me to boot entirely from floppy. When I try this on a system without a HD, the boot just seems to hang up as if it is looking for a HD. So I cannot generate a system boot for my son's floppy based system. I can boot successfully from my ORIGINAL system master floppy on both systems, but then I don't have access to my hard drive unless I manually load HDisk and H0. I split the orignal OS9boot file into separate modules and os9gened a new one with ALL the same original modules, and the problem reoccured!? I have checked the CRS's of all the modules and os9gen and everything is the same. Does anyone know why this occurs? Can it be a function of RGBDOS or the RGB utilities that allow for booting OS-9 from the HD? How do I correct the problem? (FYI: I have a 2 meg Coco 3, 80 meg SCSI HD, Ken-Ton SCSI Interface, Disto SCII with a Tandy Smartwatch and RGBDOS partitioned with 5 RSDOS compatible drives for OS9 bootfiles.) Thanks for any help, Neal -*- 87055 29-APR 23:03 General Information RE: Boot Problem (Re: Msg 87052) From: RANDYKWILSON To: NEALSTEWARD If it goes to the hard drive to get the OS9BOOT file, after loading the base kernel from track 34 on floppy, then you have a modified Boot module. I do not see a 6309 listed in your message, so I'm going to assume no PBoost or Nitros. This trick will only work if both systems are the same CPU-wise. First, boot with your original Tandy disk. Then, insert your new disk, and press reset *once*. When you hit reset only once, OS9 re-reads the OS9BOOT file, without reloading the kernel from track 34. Since the kernel currently in memory is the Tandy, it will go to floppy for the bootfile. The other side of this is os9gen and cobbler. This utilities always write out the kernel that's in memory to track 34. So, at this point, you can 'gen a boot for your son, and it will get the floppy Boot module. The bad side is that you'll lose any patches you've done to the kernel (OS9P1 only). And, since this *is* OS9, there is another way to do it. Somewhere lurking in the data base here is a utility called KUtil. This was specificly designed to do things like this. It will allow you to "lift" the Boot module from the Tandy disk (floppy), and stick it into the track 34 stuff of your new disk. It's been a while since I've worked with this, so exact details are hazy. Read the docs. :> Randy -*- 87056 29-APR 23:12 General Information RE: Boot Problem (Re: Msg 87052) From: WDTV5 To: NEALSTEWARD Hi Neal; From the description, its most obvious cause is that you are using the module "boot", part of track 34 from the RGB software kit. Your easiest fix is to go back to the database here and get my package of krnlutils. They are designed to make accessing the track 34 stuffs *much* easier. Between that utility kit, and my "vfy", preferably the latest edition, you can do anything you want to do to the "hidden track" of an os9 bootable diskette. I'd suggest making a fresh dir of the hard drive call KRNL or some such, then using vfy, split the kernal off the distribution disk to get the stock "boot", do the same with the one that won't work, and re-merge or cpa them back using the stock boot in place of yours. The krnlutils kit has a util to make a directory entry and fd that points to the kernal track which then can be copied off to wherever, and a "krnlmvr" util that can take a kernal track from anyplace that has a direntry pointing to it and put it back on your sones disk, can't spell either! But its easier to do than to describe once the utility's are in hand. Don't feel too bad, I've done the same thing a time or 2 when I was running an older st-238r. Now I'm scsi and went back to a floppy based boot, I change mine sometimes daily and doing that on the hrad drive is too much like playing russian roulette with all 6 chambers loaded! This way I can just back up one generation fof floppy and hit the reset twice to recover. fewer headaches by far even if the floppy boot is slow. Cheers, Gene Heskett, WDTV5@delphi.com -*- 87063 30-APR 15:23 General Information RE: Boot Problem (Re: Msg 87052) From: JPOTTAGE To: NEALSTEWARD The problem is probably that you have a modified sysgo or init along with H0 defined. Try nameing H0 HD. Further, if DD is defined as the hard drive, you will have to delete it from the boot file and insert a DD driver that looks to the floppy. Hope this helps. PS. I believe DD must be defined as a floppy drive even if you have not modified your sysgo or init files. o o U \_/ / Jim Pottage \ -*- 87069 30-APR 18:22 General Information RE: Boot Problem (Re: Msg 87063) From: ILLUSIONIST To: JPOTTAGE (NR) DD doesnt have to be a floppy, it can be anything you wish, on my "big" coco, I have 2 MFM hard drives, and a SCSI drive.. /DD is the larger SCSI, and /H0 and /H1 are the 2 30 meg MFM's ... -* Mike -*- End of Thread. -*- 87057 30-APR 00:55 OSK Applications RE: PGP for OSK? (Re: Msg 86999) From: 10BAUD To: DSRTFOX (NR) Drug dealers use automobiles too. That DOES NOT mean that every car should have to file a "flight plan" with the government so that drug dealers can be caught. -*- 87059 30-APR 01:25 General Information RE: Printers (Re: Msg 86881) From: 10BAUD To: MROWEN01 (NR) I use an HP ink jet on a 486 at work and an EPSON AP3250 (24 pin monochrome) on my coco. When it's my own money, I have a hard time justifying the ink jet. It seems the primary advantage is quiet operation. I paid about $169 for my Epson. Today at the Hamvention here in Dayton, I saw a 24 pin panasonic color model for $129. All the ink jets seem to be priced over $400. Choices are good (I think). -*- 87071 30-APR 18:46 General Information RE: Printers (Re: Msg 87059) From: JEJONES To: 10BAUD > All the ink jets seem to be priced over $400. Choices are good (I think). Eh? Ink jets that can do color are definitely over $400, but several black-and-white ink jet printers are well under $400. Opinions herein are solely those of their respective authors. Clipper Chip: Big Brother Inside -*- 87072 30-APR 18:58 General Information RE: Printers (Re: Msg 87059) From: LMCCLURE To: 10BAUD "All the ink jets seem to be priced over $400." If all the ink jets you have seen are over $400, either you have definitely been looking in the wrong places, or you don't consider anything that prints in black only to be an inkjet. For color printing, (unless for some strange reason you are only printing color text), a dot matrix can't touch and inkjet for quality. A dot matrix simply has too much banding and smearing, and not enough saturation. Frankly, I would trade my color-capable Citizen GSX-140 24-pin any day of the week for a Canon BJ-200 or H-P DJ500...maybe even an Epson Stylus. -*- 87084 1-MAY 12:59 General Information RE: Printers (Re: Msg 87072) From: 10BAUD To: LMCCLURE (NR) I must admit I don't do color printing, or printing that would really benefit from color. That may be why I'm so satisfied with my 24 pin black and white Epson Action Printer 3250. Are you implying that a b/w ink jet is as inexpensive as a 24 pin? -*- End of Thread. -*- 87060 30-APR 02:18 Programmers Den RE: Pixel_Blaster (Re: Msg 86996) From: MICHAELJN To: DSRTFOX (NR) Thanks for the info. I will not be able to join you at Chicago but I will consider subscribing. -*- 87061 30-APR 03:45 Telecom (6809) New Xmout module for Ribbs From: STEWARD To: ALL I have just submitted a new Xmout module for Ribbs, that will allow the transfer of files with a Dbridge system during a Wazoo session. Should also continue to work with current systems. -*- 87062 30-APR 09:34 General Information RE: Internet (Re: Msg 87008) From: TEDJAEGER To: LMCCLURE Thanks, I'll try again. Do know I got spelling right. Bests ---TedJaeger -*- 87065 30-APR 16:14 Programmers Den RE: C Compiler (Re: Msg 87012) From: DBREEDING To: JRUPPEL (NR) > Can anyone tell me if there is a way to assemble a C programming > environment using the Level II RMA? I'm assuming you are asking how to call it from "CC"? If so, you have 2-3 options. 1) Rename rma c.asm in commands file. 2) Stop before assembly ( cc1 -a prog...) then call "rma" manually. 3) There are several replacement "cc's" available here and elsewhere that are/can be modified. 4) Edit current "cc1". Use "ded" or other means to locate character string "c.asm". Then replace with "rma\0". Be sure to terminate it with the null (original 'm' will be ignored). You will also have to use "rlink" to link the code, since the original "c.link" cannot handle "rma" output, since "rma" includes additional data. "rlink" _CAN_, however, link code produced by "c.asm". The above suggestions can apply for "rlink" also. -- David Breeding -- CompuServe : 72330,2051 Delphi : DBREEDING *** Sent via CoCo-InfoXpress V1.01 *** ^^^^ ^^^^^^^^^^ -*- 87067 30-APR 17:11 Telecom (6809) RiBBS From: DENNYWRIGHT To: ALL Does anyone out there use RiBBS with the Tandy deluxe RS-232 pak? A friend has one that he can't seem to get to work. When people call after the connect 2400 message the computer just sits there. It will not respond to the caler. Any ideas/suggestions would be appreciated. -*- 87068 30-APR 17:19 Telecom (6809) RE: RiBBS (Re: Msg 87067) From: STEWARD To: DENNYWRIGHT Well, a few things come to mind. Does if have the correct carrier call code and Carrier bit set in rconfig for the serial port driver he's using? Does he have the swapped cable? Is Ribbs reporting a Carrier Detected message before the Connect message? Let me know what his system confiqureation is as far as what driver port, his setting in his rconfig etc. -*- 87070 30-APR 18:39 Telecom (6809) RE: RiBBS (Re: Msg 87068) From: DENNYWRIGHT To: STEWARD carrier callcode is 130, carrier bit is 64, Using Sacia and /T2 with a swa pped cable. I don't know if there is a carrier detected message or not. Hope this helps. -*- 87073 30-APR 18:58 Telecom (6809) RE: RiBBS (Re: Msg 87070) From: STEWARD To: DENNYWRIGHT (NR) For Sacia, he needs a Carrier Callcode of 40. Also, find out what his xmode is for /t2 -*- 87081 1-MAY 09:09 Telecom (6809) RE: RiBBS (Re: Msg 87070) From: JWILKERSON To: DENNYWRIGHT (NR) I think he should use MWP rather than SACIA. That is what Ed and I used..... too bad Ed has disappeared..... Seeya -- John -*- End of Thread. -*- 87075 30-APR 21:37 Applications (6809) RE: ESC/P22 code (Re: Msg 87038) From: CHYDE To: JRUPPEL (NR) As long as the source is in C (or perhaps basic) the code should be portable. Unfortunately the program may require more mempry than the 6809's 64k workspace. You may be able to work around this using virtual memory, but you would have to write the paging routines, which may or may not be easy . Of course if I remeber right the dvi-esc/p2 program requires the input file to be a Tex dvi file and Tex is just too large to run on the CoCo. Chris -*- 87076 30-APR 21:40 General Information RE: VIP Writer (Re: Msg 86979) From: BANDMAN To: WA2EGP Thanks for the comeback! I have located what I needed from another SIG member! DELPHI and the Community comes through again! Thanks again for the help! -*- 87078 1-MAY 01:46 General Information hi! From: NETCRUISER To: ALL hi all! glad to be back! used to be user DEMIGOD, missed y'all! -*- 87079 1-MAY 01:47 Applications (6809) msdos From: NETCRUISER To: ALL does anyone know of an msdos program that will read and write os9 disks? ive been looking for one for a while now, cant seem to find... -*- 87083 1-MAY 11:34 Applications (6809) RE: msdos (Re: Msg 87079) From: COLORSYSTEMS To: NETCRUISER (NR) > does anyone know of an msdos program that will read and write os9 disks? > ive been looking for one for a while now, cant seem to find... There is one called Elite*Xfer. Available from: Elite Software Box 11224 Pittsburgh, PA 15238 ------------------------------------ Zack C Sessions "We did not inherit the Earth from our Ancestors, we borrowed it from our descendants." Ancient proverb -*- End of Thread. -*- 87080 1-MAY 01:49 Programmers Den programmers den From: CEELEE To: ALL Help, OS9cn(tom Birt, told me that someone had offered to release the source code for STG bbs (I think). I would like,along with others in the OS9 Users of San Diego, try porting it to os9000. also if anyone has been working on graphic progerxxx orxxx prog ramming with OS9000 please let us know. either Myself CeeLee or OS9CN Thanks. -*- 87082 1-MAY 10:29 Applications (6809) Home manager From: MRUPGRADE To: DSRTFOX (NR) Well Frank, we went to the speedier means last night to cut time ratios from Canada. As youo suggested,, download. I downloaded theh latest ver of a nice things added. Unless you using a PC for your subscriberlist,,, you may want to use theh mailer in this one. It goes anywhere from a simple "aunt Martha's Christmas list,, to a pub; publishers (international) mail base. EXp dates an all. It beats anything I've seen. BTW,, could get "Y" modem to recieve in ULTERM??? Xmodem worked fine. now I gotta move 'em to OS with OS-Copy. Dan Darn,, I may have to learn OS yet. Til then,,, Terry Simons -*- 87085 1-MAY 13:15 Telecom (6809) RE: Supercomm... (Re: Msg 86524) From: 10BAUD To: DBREEDING (NR) Not a big point, but every time I see the remark about osterm not having ASCII upload, I like to point out that some kind soul created "slowio" which I'm sure must be in the telcom data base here. You just use the clear key to toggle to another window and type+ slowio /t2 where "filename" is the ascii file you want to upload. Once you get the hang of it, it's really very easy. If you toggle back to the osterm window while the file is still uploading, you can see the characters go by. I mention it because I think that without slowio, I'd be looking for a replacement for osterm which I love in every other respect. -*- FORUM>Reply, Add, Read, "?" or Exit>