read new nonstop follow 89048 3-AUG 18:35 General Information gen From: PHILSCHERER To: ALL Does anyone know if there are any books available for "curses"? The package comes with OS9000 and is taken from Unix. -*- 89055 3-AUG 20:41 General Information RE: gen (Re: Msg 89048) From: MITHELEN To: PHILSCHERER You should be able to find something at any respectable book store... Look in computer section, probably grouped with the Unix stuff... -*- 89064 3-AUG 23:12 General Information RE: gen (Re: Msg 89048) From: WA2EGP To: PHILSCHERER There are books (or at least one) available. I picked up one at a local Barnes & Noble called Unix Curses (I belive - of course I can't find the darn book right now, probably buried in my UNIX stuff). It wasn't cheap. If I locate it within a reasonable amount of time, I'll send you the name and author. BTW, it also explained termcap as an introduction to curses. I guess I gotta clean this place up. (grin) -*- 89078 4-AUG 08:56 General Information RE: gen (Re: Msg 89048) From: MROWEN01 To: PHILSCHERER The best books on any UNIX topic are from O'Reilly & Associates, Inc (IMHO). I have several of their books. I do not have the Curses book, but I'm sure that it will be every bit as authoritative as the others. The book is called Programming with Curses. It's $12.95. Call in US 1-800-998-9938. -Mike -*- 89079 4-AUG 18:43 General Information RE: gen (Re: Msg 89055) From: PHILSCHERER To: MITHELEN Thanks for the lead! -*- 89080 4-AUG 18:45 General Information RE: gen (Re: Msg 89064) From: PHILSCHERER To: WA2EGP That's the kind of book I'm looking for. I have a Barnes and Noble near by. Thanks! -*- 89081 4-AUG 18:47 General Information RE: gen (Re: Msg 89078) From: PHILSCHERER To: MROWEN01 Thanks for the lead Mike! I'll give em a call. -*- End of Thread. -*- 89049 3-AUG 19:01 OSK Applications RE: MM/1 Sound cable (Re: Msg 88972) From: NIMITZ To: HAWKSOFT Thanks Chris. I need all the pointers I can get. Say, can I get your catalog in electronic form? Same goes for all vendors out there! I need to get a sourcebook going! David -*- 89050 3-AUG 19:15 System Modules (6809) RE: Making a new boot disk from scratch (Re: Msg 89042) From: ISC To: COCOKIWI Hey! Thank you, Dennis! I looove kiwi! Bill -*- 89067 3-AUG 23:28 System Modules (6809) RE: Making a new boot disk from scratch (Re: Msg 89050) From: COCOKIWI To: ISC you is welcome dennis -*- 89085 4-AUG 21:49 System Modules (6809) RE: Making a new boot disk from scratch (Re: Msg 89042) From: DSRTFOX To: COCOKIWI Thanks Dennis, but you can get that by typing "modpatch -?". Doesn't help a guy like me who has no idea what he's doing!! I did (apparently) get it to work with no problems. I exited with plain BREAK though, so they might not have taken!! Will find out next time I boot (didn't have time to do it all tonight) -*- 89086 4-AUG 21:51 System Modules (6809) RE: Making a new boot disk from scratch (Re: Msg 89085) From: DSRTFOX To: ISC Bill, I did as you said, only exited with a plain BREAK (you didn't mention how to get OUT of it!!!!). And I forgot to run COBBLER before I had to quit and come to work too. Will try it all again tomorrow. Had to make a new boot tonight first. Thanks for the help! -*- 89103 5-AUG 21:04 System Modules (6809) RE: Making a new boot disk from scratch (Re: Msg 89086) From: ISC To: DSRTFOX (NR) Frank, I thought I mentioned it, but maybe I did not. Here are the steps for changing diskette access time: modpatch l d0 (that's L d0, not 1 d0) c c 14 00 03 v (exit with CTRL/BREAK, [that's control and break TOGETHER which is the eof character]) Good Luck. Bill -*- 89107 5-AUG 21:54 System Modules (6809) RE: Making a new boot disk from scratch (Re: Msg 89086) From: ISC To: DSRTFOX (NR) Frank, In addition to exiting with CTRL/BREAK, also don't forget to cobbler your disk before you exit the system so that the changes remain permanent. Bill -*- End of Thread. -*- 89051 3-AUG 20:11 General Information RE: New Conference(Ideas Welcome) (Re: Msg 88992) From: HAWKSOFT To: EDELMAR Hi Ed! > > officers are online anyhow. I imagine 1 or 2 at least will be able to > > find time to stop by for an hour or two and discuss any current > > events, ideas and proposals with the community. .... > > So long as meetings are informal, I see no problem with people meeting in > conference (or in the forum) to discuss the OS-9 UG or matters they > feel might/should be the province of the UG. Such meetings/discussions > could be very beneficial. Certainly, the officers and/or directors could > participate as well. ... > your home, at the local school, etc. Does the fact that members call me > and/or the other officers and directors mean others are being snubbed? > > > .... 2) I wonder myself about the possibility of making Delphi the > > official online home of the UG. Would this be a snub to the other > > services? > > The need for an 'official online home' for the UG has been discussed at > several BOD meetings. Nothing concrete has resulted from these > discussions. > Keep up the interest and good ideas. Just a quick idea re: an 'official online home'. Would it be possible to work out a deal with Delphi (similar to Rainbows) where OS9UG members could join for free and maybe get a little better deal on connect time? Maybe like 5 hours for $12 instead of 4 for $10? Would get more people to the 'official online home' and add another perk to the membership. (Are you listening, Paul J ??) BTW, would you like a demo copy of GCDP the G-window audio CD Player?? I've got the window refreshing itself and a few other fancies. If you have a CD-Rom connected, the worst it will do is display 'NO DISC' on the display window. Chris (the other one) :-> :-> :-> :-> :-> :-> :-> Chris "HAWKSoft" <-: <-: <-: <-: <-: <-: <-: Delphi: HAWKSOFT Internet: HAWKSOFT@DELPHI.COM ******************< Uploaded w/ InfoXpress vr. 1.01.00 >****************** -*- 89056 3-AUG 20:49 General Information RE: New Conference(Ideas Welcome) (Re: Msg 89051) From: MITHELEN To: HAWKSOFT I doubt the feasability of getting discount rates for UG members... I also do not think it is appropiate to limit the "online home" to one specific system... the online home should be the Internet... that gives the most people the easiest access... -- Paul -*- 89090 5-AUG 01:17 General Information RE: New Conference(Ideas Welcome) (Re: Msg 89056) From: JOELHEGBERG To: MITHELEN Paul, > I also do not think it is appropiate to limit the "online home" to one > specific system... I agree. =========================================================================== = Joel Mathew Hegberg M.O.T.D. Editor = = (JoelHegberg@delphi.com) 68'micros Columnist = = (JHegberg@aol.com) Sub-Etha Software Programmer = =========================================================================== -*- 89114 5-AUG 23:25 General Information RE: New Conference(Ideas Welcome) (Re: Msg 89006) From: CPERRAULT To: JOELHEGBERG >>Possibly, and I'm pretty sure the OS9UG does not want to limit itself to one official online home.<< That is a good point. I didn't think of it that way. ONE official online homebase might be holding it back. >>I suspect we'll have some on-line meetings lined up in the near future.<< Sounds great. Now I can concentrate on those other conferences. >>I wouldn't expect them to be more frequent than monthly.<< That should be fine, unless we should, by freak of nature, experience an unstoppable surge of activity. ;-) See Ya >Chris< -*- 89115 5-AUG 23:25 General Information RE: New Conference(Ideas Welcome) (Re: Msg 89009) From: CPERRAULT To: JEVESTAL >>I would be interested, but Sunday night is not my best night. How about a Monday or Wednesday night conf?<< I'm willing to switch to either Monday at 10:00 or Wednseday at 9:00 if you all are. The only catch for me is, depending on what happens at work in the next two or three months, I might have to switch from Monday to Tuesday. Everyone, let me know what the best times are for you so I can figure out a good time. I'm trying to make it so I'm not up too late on work nights. >Chris< -*- 89117 5-AUG 23:25 General Information RE: New Conference(Ideas Welcome) (Re: Msg 89031) From: CPERRAULT To: REVWCP >>I work on Sundays.....<< Why didn't I think of that? LOL Sounds like it might not be on Sunday afterall if everyone else agrees :-) >Chris< -*- 89118 5-AUG 23:25 General Information RE: New Conference(Ideas Welcome) (Re: Msg 89051) From: CPERRAULT To: HAWKSOFT (NR) >>Would it be possible to work out a deal with Delphi (similar to Rainbows) where OS9UG members could join for free and maybe get a little better deal on connect time?<< I'm sure any deal similar to that is possible. Whether it feasable yet, is probably doubtfull. That would surely cost some money on the UG's part, and at this point the money that is available(probably not much) would be better spent on other things. I like the idea tho. If such an online home was established it would also be nice for the system to have a way of knowing whether or not you are a member, for cases where you want access to information/files that are available to members only. >Chris< -*- End of Thread. -*- 89052 3-AUG 20:11 OSK Applications RE: many (Re: Msg 88989) From: HAWKSOFT To: SROTTINGER Steve: > The CD-ROM drivers, do they also include a File manager to handle > ISO-9660 disks? I have thought about working on such a file manager > myself; however, I don't want to duplicate what has already been done. > I'd love to be able to take some off the shelf CDs, and use them with my > BBS. No, the drivers from Dirt Cheap use the rbf file manager. This means that you must use custom programs to copy files, read directorys, and such. David Graham posted a message that he had someone working on a real file manager for CD's. I don't remember who it was, but, my hand went up immeadiatly for beta-testing!!! Chris :-> :-> :-> :-> :-> :-> :-> Chris "HAWKSoft" <-: <-: <-: <-: <-: <-: <-: Delphi: HAWKSOFT Internet: HAWKSOFT@DELPHI.COM ******************< Uploaded w/ InfoXpress vr. 1.01.00 >****************** -*- 89058 3-AUG 20:54 OSK Applications RE: many (Re: Msg 89052) From: WDTV5 To: HAWKSOFT Yeah, so did mine! I have (sorta its being repaired/replaced) an NEC CDR-25 that I'm going to use with the Amiga, but if the drivers were avail, I also could read it on the coco since I'm already scsi with the SC-II+4n1. So as I said, my mitt went up as a beta tester too. Now if the originator of that rumor is copying the mail, maybe we'll get it going. I'd love it! Cheers, Gene -*- 89072 4-AUG 01:34 OSK Applications RE: many (Re: Msg 89058) From: NIMITZ To: WDTV5 (NR) Rumor? We don't need no stinkin' RUMORS! Ray Patterson of Patterson Electronics is working on CD file manager stuff, for ISO9660 with extensions. (he is following the full standards), He will also be taking Mark's place in the MM/1 world, providing repair work and assisting me with hardware stu ff from time to time. Currently he is planning to run up to St. Louis this weekend and make an offer on Mark's remaining MM/1 stock and his machine. David -*- 89108 5-AUG 21:54 OSK Applications RE: many (Re: Msg 89072) From: HAWKSOFT To: NIMITZ (NR) Hi David! > Rumor? We don't need no stinkin' RUMORS! > > Ray Patterson of Patterson Electronics is working on CD file manager > stuff, for > ISO9660 with extensions. (he is following the full standards), He will > also be taking Mark's place in the MM/1 world, providing repair work and > assisting me with hardware stu > ff from time to time. Currently he is planning to run up to St. Louis > this weekend and make an offer on Mark's remaining MM/1 stock and his > machine. David > YAY!!!!!!!!!! Will the file manager support CD-I as well???? Seriously, if I can offer any assistance, have Ray contact me (or vice-versa). I have played around with the CD-I disks in my CD-Rom reader quite a bit. They're a bit different tha the ISO9660 disks. The CD-Rom reader uses a special mode to access CD-I disks. BTW, this beta-tester is warmed-up and ready!!!! Chris :-> :-> :-> :-> :-> :-> :-> Chris "HAWKSoft" <-: <-: <-: <-: <-: <-: <-: Delphi: HAWKSOFT Internet: HAWKSOFT@DELPHI.COM ******************< Uploaded w/ InfoXpress vr. 1.01.00 >****************** -*- End of Thread. -*- 89053 3-AUG 20:36 Programmers Den RE: shareware stuffs (Re: Msg 89029) From: WDTV5 To: WA2EGP Given there is a 'back EMF', but under steady state conditions, non-measurable. Thats why I alluded to the AC circuit and impedances. However, since its readily apparent that you studied the subject at l;least as well as I have, is it because there's more $$ in biology or what? My background is a story to repeat (ad nauseum). I had an alchoholic old uncle who made his beer $ by fixing the "all american 5 tubers". He had a list on the wall that told him to change this if it did that. When I (at 6-7 years old) asked what was wrong with the parts he changed, he couldn't tell me. I wanted to know, and thats the story of how I got into electronics with an 8th grade education! I've never stopped sticking my nose into things to see how they work. My nose has been replaced with a 100 mhz dual trace scope, but not much else has changed in the past 50 years except the steady march of progress. While I use all kinds of "smart sand", and I've taken a mail course or two on how its made, the fact that what is basicly sand can actually do these things is still a case of wonderment to me at times. But then, as I said, my reading is eclectic, and some of the stuffs I read in the biological field are equally amazing. Cheers, Gene Heskett -*- 89061 3-AUG 22:57 Programmers Den RE: shareware stuffs (Re: Msg 89053) From: WA2EGP To: WDTV5 Well, the reason I got a degree in bio was that 1. I was better in it in HS than chem 2. I was never exposed to physics in HS. My old man was a ham radio operator from "way-back" but due to reasons I choose not to make public, I wasn't interested in electronics at that time. When I hit college, I had to take physics and the professor was so bad, he and the course made no sense. (Note: If I had it in HS, I would have survived quite nicely) My HS did not prepare me for college at all. I retook the course with the head of the department and aced it. The original prof I had got canned. Never really got into it because of the way calculus was treated by the math dept.....no applications! (Newton was spinning in his grave.) The only thing that kept me going was the ham radio, which I got into after the old man died. Geez....I even got jobs based on what I learned from that hobby. Got into computers from picking up an old 8080 at RS and then tried to build a machine to use it. Even got it to work (once). Moved from one machine to another (all orphaned) until OSK. Been fun. One thing though, I've learned more teaching the subjects I teach than I ever learned in school. I pick up a lot in reading but the darn job gets in the way! Too bad I'm too numerant to buy lottery tickets. Then I could really have the time.... -*- 89062 3-AUG 22:59 Programmers Den RE: shareware stuffs (Re: Msg 89043) From: WA2EGP To: COCOKIWI Sounds like your cable company has VERY leaky cables. (Probably a bad hook up at a neighbor's house) At least the good stuff is leaking in. -*- 89068 3-AUG 23:30 Programmers Den RE: shareware stuffs (Re: Msg 89062) From: COCOKIWI To: WA2EGP I have seen Others like it! all over! MOST tv,s on the market right now,STINK. their TV input lines are so prone to outside stuff......even Hams have fun! Dennis -*- 89071 4-AUG 00:06 Programmers Den RE: shareware stuffs (Re: Msg 89061) From: WDTV5 To: WA2EGP Lotery? nah. I don't think I've put more than a $20 bill in it since they made it legal here and there years ago. Like you, I know who really makes the $ on it, and it darned sure isn't you or I. And as to the comments re the HS physics stuffs (and teachers) I have to agree! I conned them into letting me sit in on the senior class when I was in the 8th grade. Lasted about a month, till the teach got Newtons 3rd wrong and I called him on it. Got expelled for 3 days even if I was right! That was just one reason I gave up on "formal" schooling lo, these many years ago. They ahd taught me how to read (but not how to spell on a $#@%& qwerty keyboard) at around 500 per, with enough phonics to take it from there. So I did. Gee I wish they were still teaching phonics in schools now. I'm constantly amazed at the simple words children see in the paper on a daily basis that, because they have no foundation in phonics, is total gibberish to them! And of course, they are now in the paper business and can't spell the flippin headline right, let alone the text! Frankly it makes me want to run for the school board, but then I find that there is so much federal meddling in the "approved" curriculums that we'ed all have to cover wash in hot dirt to actually make any worthwhile changes. My wife is a teacher too, and I can tell you that the biggest problem in the school classroom today isn't curriculum, its discipline! The inability of the teacher to maintain order in the classroom is because there are no tools left for them to use to establish order in a dis-orderly class. She has even been "on report" for yelling back at a kid who was busy useing the whole library of 4 letter words on her! I could go on, but I'm sure the rest of the teachers here can fill in their own horror stories. Cheers - Gene -*- 89074 4-AUG 03:24 Programmers Den RE: shareware stuffs (Re: Msg 89071) From: MMCCLELLAND To: WDTV5 (NR) Hey! I see that you're interested in electronics. Question: Do you make PC boards? What method(s) do you use? I ask because I am compiling a document on making boards, and I need more input. Thanks! -=Mark=- (KE6JKS) Delphi:MMCCLELLAND -*- 89088 4-AUG 23:19 Programmers Den RE: shareware stuffs (Re: Msg 89071) From: WA2EGP To: WDTV5 (NR) Agreed on the teachers' stories. Actually is not discipline but actually allowing the teacher to do their job without some one sticking their nose in and removing the teacher's authority. The kids see that as a license to play since the teacher can't do anything because they will be sitting outside the principal's office. As far as lotteries go, I played once. Didn't win so I stopped. Actually I've found shareware kind of a lottery. (Some one had to get back to the thread.) The times I have sent in money, most of the promised support was vaporware. Checks were cashed but no manuals, or upgrades, or bug warnings were received. Now this is not every one that I "registered" but enough to make me a little skeptical when I see all the nice promises. That was all in the DOG world. I have not gotten to looking at all the programs that I have d/l'ed for OSK. I do have to send in some bucks for some that are pretty good eventhough I haven't used them much. I will admit that in some cases I have slacked off in that area. So many programs...so few time slices. (grin) -*- 89097 5-AUG 05:39 Programmers Den RE: shareware stuffs (Re: Msg 89043) From: BROWN80 To: COCOKIWI Have you called their repair service. Most cable companies will want to leaks in their systems because the FCC is getting very picky about it. Usually this will be bad outlet wiring, a bad drop or a crack in the dis- tribution lines. Call them up and if they don't fix it call them again. I should warn you though that every once in a while the TV will be at fault. Some TV's have inadequit (sp) shielding and there is nothing the cable company can do about that. If that is the problem they should be able to bring in a test set and show you that it is a TV problem and not the cable. John Brown -*- 89122 6-AUG 00:22 Programmers Den RE: shareware stuffs (Re: Msg 89097) From: COCOKIWI To: BROWN80 (NR) it is the tv....problem is the signal is very strong here.....and itworks fine with the VCR......the other tv in the house is the same.. it creeps in via the link between the two..There was NO problem BEFORE they switched the stations around! they moved 13 to 41......and 20 to 13... The problem can be fixed if THE CABLE CO ...Switched 13 back to 13..... Channel 13 here can be recieved with rabbit ears or ones finger!on the back terminals.. Dennis -*- End of Thread. -*- 89054 3-AUG 20:40 General Information RE: lotus1-2-3 files on os9 (Re: Msg 89028) From: MRGOOD To: MDALENE As far as I know, SYLK was a Microsoft standard. In all my years of using Lotus 123, I've never seen mention of SYLK either in the manuals or on the online help system. Hugo -*- 89083 4-AUG 19:20 General Information RE: lotus1-2-3 files on os9 (Re: Msg 89054) From: MDALENE To: MRGOOD (NR) >As far as I know, SYLK was a Microsoft standard. In all my years >of using Lotus 123, I've never seen mention of SYLK either in the manuals >or on the online help system. Maybe, but it would not hurt if that person did try it. I think Lotus does use it. it is a "standard" at worst all he will have is a garbled output file. at best, he may be able to process the work sheets. Michele Marie Dalene -*- End of Thread. -*- 89057 3-AUG 20:50 General Information RE: rma assembly language (Re: Msg 89045) From: WDTV5 To: ALAIN1155 hehe, thats the Relocating Macro Assembler, part of the level 2 upgrade to the C compiler. Most folks let the rest of the compiler feed it. The book that come with is accurate, if awfuly concise to the point of not telling you everything of the minutae. Basicly what it does is to take the output of either C.Pass2 or C.Opt, and translate that "assembly" source codes nemonics into machine code the cpu understands. However, the resultant code is not yet executable because it still needs to be "linked" with the startup front end, and any librarys it uses. This is why most run it as part of the C compiler itself. That makes about 90% of all the housekeeping automatic. The corresponding linker which was originally called "c.link" is now called "r.link" and you'll find it on the same disk. There are "aftermarket" replacements for the compilers executive program "cc2" which have those name conversions already done, or you can just rename them to the older name as long as the old files aren't around in the same path. Cheers, gene -*- 89076 4-AUG 05:21 General Information RE: rma assembly language (Re: Msg 89057) From: ALAIN1155 To: WDTV5 (NR) OK, but when to enter a machine language program and then try to use RMA to assemble it, i always get bad mnemonics errors even thought i copied the original codes as is. Therefore i cannot continue with r.link to finish the process. Also what is the use o f the DEFS files Alain -*- End of Thread. -*- 89059 3-AUG 21:39 Telecom (6809) RE: 9600 Baud (Re: Msg 89023) From: WDTV5 To: KENTMH Humm, that sure sounds like a clock problem. And we are infamous for that! Whats occuring is a loss of the ability to recognize an interrupt from the rs-232 pack. It can occur from several causes. The first, and easiest for non-solderers to handle is to get the latest clock module for your system. Unforch, we have at least 4xvendors solutions to the problem, and only the one thasts right for your system will work. Furinstance, I've had a hardware clock with battery backup so long I tend to forget there are those who still have to set the clock time/date at bootup. And I'm inclined to think that the jumper mod in the multipack is still a given. Thats where you pull the pcb out of the mpi, uncover the bottom, locate pin 8 on all the sockets for the plugins, and solder a jumper across the bottom connecting all pin 8's together. Some eeven jumper the slot switch, or jumper it all the way to the edge connector where it plugs into the coco. With the long term dependability of that cheep slide switch, thats not too bad an idea, but I did not do mine that way, and I only think its hurt me once in 8-9 years. What happened is that the clock as written for the normal distribution os9, doesn't properly reset the Gime chips internal registers. This bug, if you want to call it that, effectivly prevents comm progs from running above 600 baud reliably. With the fixed clocks, that gime toggle is handled correctly, and no data is lost even at 9600-14,000 rates. The mpi fix can be required also depending on the software configuration required to match your exact hardware. I wouldn't think of try it without it here. But then, I'm full and wish the mpi had at least 4 MORE slots! Anyway, if you can find the package of clocks in the database that contains the phrase "ed9", by Eddie Kuhns, thats the best place to start. If you're running a native mode system, then that clock for your system will still need to be converted to run in the native mode. In the unlikely event you are native, and a Disto SC-II + 4n1 user, then theres a clock I converted here in the database too. I hope this information is helpfull. Cheers, Gene - I'll be offline for the next 2-3 weeks, vacation and all that. -*- 89060 3-AUG 22:14 Telecom (6809) RE: 9600 Baud (Re: Msg 89059) From: REVWCP To: WDTV5 Dear Gene: As a native Disto SC-II/4-in-1 user...thanks for the clock. Leave it to me to fit the unlikely event catagory............... Del *.txt* (oops wrong macro) With all best wishes, Brother Jeremy, CSJW OS9 User's Group Treasurer -*- 89070 3-AUG 23:52 Telecom (6809) RE: 9600 Baud (Re: Msg 89060) From: WDTV5 To: REVWCP You are welcome Brother Jeremy! While I'm not an "official" member of the users group, let me add my .02$ worth and say that the huge majority of the users left, ARE here on delphi. Why not make it the official home of the users group? Cheers - Gene -*- End of Thread. -*- 89063 3-AUG 23:12 General Information A little tale... From: MARTYGOODMAN To: ALL > > A pilot's flying a small, single-engined charter plane with a > > couple of really important execs on board. He's coming into > > Seattle airport, only there is a thick fog, less than 10ft of > > visibility, and his instruments are out. So he circles around > > looking for a landmark. After an hour or so, he's pretty low on > > fuel and the passengers are getting very nervous. At last, in a > > small opening in the fog, he sees a tall building with one guy > > working alone on the fifth floor. > > > > The pilot banks the plane around and winds down the window and > > shouts to the guy, "Hi! Where am I?", to which the solitary > > office worker replies, "You're in a plane". The pilot winds up > > the window, executes a 275 degree turn and proceeds to execute a > > perfect blind landing on the runway of the airport 5 miles away. > > Just as the plane stops, so does the engine as the fuel has run > > out. > > > > The passengers are amazed and one asks how he did it. "Simple," > > replies the pilot, "I asked the guy in the building a simple > > question. The answer he gave me was 100 percent correct, but > > absolutely useless; therefore, that must be Microsoft's Support > > Office and from there the airport is just 5 miles away on a > > course of 87 degrees! Any questions?" ------- end ------- -*- 89065 3-AUG 23:20 General Information RE: A little tale... (Re: Msg 89063) From: WA2EGP To: MARTYGOODMAN (NR) HAHAHAHAHAHAHA...thump (fell outta my chair). That's better than the one someone told me (and I can't vouch for its truth) about a business that wanted a cheap file server, so they got a CoCo III. Unforch the Intel machines couldn't keep up with it(!). BTW, with a little modification, that story could read Tandy's Support Office.... -*- 89091 5-AUG 01:17 General Information RE: A little tale... (Re: Msg 89063) From: JOELHEGBERG To: MARTYGOODMAN (NR) Another very funny story, Marty! =========================================================================== = Joel Mathew Hegberg M.O.T.D. Editor = = (JoelHegberg@delphi.com) 68'micros Columnist = = (JHegberg@aol.com) Sub-Etha Software Programmer = =========================================================================== -*- End of Thread. -*- 89066 3-AUG 23:26 General Information Book From: NEWKID To: ALL I hope I'm not too late. I have good news for everyone interested in obtaining The C Programing Language by Kernighan & Ritchie. Remember these numbers. ISBN 0-13-110163-3 (800) 947-7700 Prentice Hall Publishing has the book in stock. Credit cards orders are accepted. James -*- 89069 3-AUG 23:41 OSK Applications RE: Ghostscript (Re: Msg 89032) From: JOHNREED To: KSCALES > > It took about 11 minutes per page, but the quality on my Citizen GSX-140+ > was excellent! (I was using the "epsonc" driver, just in case there was > some colour in the files, but there wasn't. I also have a basic ATM > font set. On my 68070...) > > Many thanks for all of the effort you have invested in porting this > package. Now I just have to convince Darleen that I really do need > more MIPS, more than we need that new chesterfield... > Glad you like it, Ken. I've learned a lot about "C", the GNU GCC compiler, and PostScript on that project. BTW, for a quicker check for color in a PostScript file, use the kwindows driver in the gs2 program. It does color. Try the "escher.ps" demo in the "gslib" archive for a neat bunch of multicolor interlocked butterflies. ******************************** A stitch in time -------------------- ------ is worth two in the bush John R. Wainwright <> <> -*- 89073 4-AUG 01:55 OSK Applications RE: Ghostscript (Re: Msg 89069) From: LARRYOLSON To: JOHNREED John, I too would like to thank you for all your work on getting Ghostscript working on the MM/1. I was able to get it working with this hp550c printer, and the escher.ps & tiger.ps pictures printed out beautifully. I just wish there was one more program added to Ghostscript, something that would let me convert Gif's or other picture files, to a Postscript .ps file which I could then print out. This would sure save me a bunch of the head scratching that I'm doing now, in trying to write a screen printer program. larry ----- Larry Olson ----- -*- End of Thread. -*- 89075 4-AUG 03:43 Telecom (6809) Need more speed! From: MMCCLELLAND To: ALL Can anybody out there please tell me how to use higher speeds than 4800 baud under OS9? Right now I am using a converted DC Modem Pak with Sacia at 4800 I can't seem to get reliable operation at 9600 baud w/ this combo, though. I assume that the problem is that I don't have hardware handshaking. I would use a better RS-232 device, but none of them ever worked properly. Any help will be greatly appreciated! -=Mark=- (KE6JKS) Delphi:MMCCLELLAND -*- 89084 4-AUG 21:00 Telecom (6809) RE: Need more speed! (Re: Msg 89075) From: MIKE_GUZZI To: MMCCLELLAND I use two modems at 9600 baud with 100% reliability. i couldn't get more then 4800 baud with sacia until i got nitros-9. i had even tried other drivers but no luck. hardware handshaking is not required for 9600 baud. I have been using two modems at 9600 baud (sometimes both running at the same time!) without a problem Mike -*- 89089 5-AUG 00:22 Telecom (6809) RE: Need more speed! (Re: Msg 89084) From: CHARLESAM To: MIKE_GUZZI (NR) Mike, just what exactly is your hardware setup? Modem? RS232? I'd like to try that next(9600). I already have my system Nitros-9ed. Thanx Charlie -*- 89093 5-AUG 05:11 Telecom (6809) RE: Need more speed! (Re: Msg 89084) From: MMCCLELLAND To: MIKE_GUZZI (NR) Nitros-9? Where can I get that? BTW, what RS-232 interface are you using? -=Mark=- (KE6JKS) Delphi:MMCCLELLAND -*- 89105 5-AUG 21:42 Telecom (6809) RE: Need more speed! (Re: Msg 89075) From: ISC To: MMCCLELLAND Mac, One of the best RS-232 devices I have found is the RS-232 pak from CoNect. You can reach Rick Ulland who makes and sells it through REVCWP here. It can drive long cables and has all socketted chips. It also supports all handshaking signals. Bill -*- 89109 5-AUG 22:17 Telecom (6809) RE: Need more speed! (Re: Msg 89093) From: KSCALES To: MMCCLELLAND > Nitros-9? Where can I get that? BTW, what RS-232 interface are you using? Mark, sales of NitrOS-9 are currently "on hold", pending release of the upcoming new release (v1.20), slated for later this month. The authors are madly working at putting together a new package, incorporating a lot of the feedback they got from users at the Chicago Fest. (Yes, the RBF compatibility problem with 'lha' is fixed, amongst other things. And a totally different approach to installation.) Distribution arrangements for the new version are still being arranged, but Northern Xposure will definitely be involved. Contact Colin McKay through Internet at: cmckay@northx.isis.org (IN%"cmckay@northx.isis.org" from Delphi) Or: Northern Xposure 7 Greenboro Crescent Ottawa, Ontario Canada K1T 1W6 613-736-0329 -------------------------------------------------------------------------- Ken Scales Delphi:KSCALES Internet:kscales@delphi.com CIS:74646,2237 -- Composed with KVed/Ved and uploaded with InfoXpress -- -*- 89110 5-AUG 22:19 Telecom (6809) RE: Need more speed! (Re: Msg 89105) From: REVWCP To: ISC Dear Bill: I agree about the CoNect RS-232 pak. Rick built a good piece of hardware and it received this monk's 5 cross rating... With all best wishes, Brother Jeremy, CSJW OS9 User Group Treasurer -*- End of Thread. -*- 89077 4-AUG 05:26 General Information multivue From: ALAIN1155 To: ALL Does anyone knows if it is possible to patch multivue so that a direccally appearing on boot up Alain -*- 89082 4-AUG 18:57 General Information RE: multivue (Re: Msg 89077) From: PHILSCHERER To: ALAIN1155 Hi Alain--I used to do that and I think if you can run MV from your HD, then you can put the same command as the last one in your startup file and you should be there. Hope I remember right. -*- 89094 5-AUG 05:16 General Information RE: multivue (Re: Msg 89082) From: ALAIN1155 To: PHILSCHERER Do not have a HD. Tried it but did not work. looks like startup ignores it -*- 89102 5-AUG 18:48 General Information RE: multivue (Re: Msg 89094) From: PHILSCHERER To: ALAIN1155 (NR) Do you have a program module called autoex in your CMDS? -*- End of Thread. -*- 89087 4-AUG 21:54 General Information RE: OS-9 Patches for the Coco III (Re: Msg 89040) From: DSRTFOX To: ISC Bill, from the survey results I recently got back, you're about the "typical" CoCo user.... using a combination of OS-9 and DECB apps, and a DOS or other box for heavier work. I do the same, using Dynacalc for my business records, DML9 for mail labels (both OS-9), Simply Better for text processing and billing, and UltimaTerm for telecom. I d/l with that then use the RSDOS command to transfer the files to OS-9 with never a problem. Keeps me from having an MPI also!! Then, of course, I do al the DTP work on a 486DX/50.... -*- 89104 5-AUG 21:21 General Information RE: OS-9 Patches for the Coco III (Re: Msg 89087) From: ISC To: DSRTFOX (NR) Frank, from here in OS9 as well as Dynastar which I have seldom used. I also use WPShel from Colorsystems. On the RSB side I have Max-10, Simply Better and Word Power 3.3 of which I use Max-10 the most, but I also have MYED, Quikword and CC3Write from here. I use the no-halt controller from Disto for my floppies, so Ultimaterm gives me trouble. So does Word Power 3.3. I like the RTC though, so, it's a minor inconvenience. I am still looking for a good terminal program for OS-9 which is vt100 compatible and has all of the file transfer protocols like Supercomm does. I have an old-style MPI on which I have strapped all of the pin 8 connections and an old Packard/Bell 2400 baud modem running to a CoNect RS-232C pak. I have a P5 Pentium 60 mhz box on order with soundblaster, CD/ROM and tape backup on order. 542 MB hard drive & 8 MB of memory. Probably will dim the house lights when I plug in that power strip. Bill -*- 89106 5-AUG 21:45 General Information RE: OS-9 Patches for the Coco III (Re: Msg 89087) From: ISC To: DSRTFOX (NR) Frank, That first line from my previous message should read: "I have VED from Bob van der Poel, WPShel from Colorsystems, Dynastar which I seldom use and sled and ed from here for OS-9. Bill -*- 89130 6-AUG 16:54 General Information RE: OS-9 Patches for the Coco III (Re: Msg 88994) From: DBREEDING To: MIKE_GUZZI (NR) > I have debated switching to > another system but i just don't see one out there that can do the smooth > multitasking os9 does. Even the newest IBM machines just don't do it > right. Ive seen 486 systems bogged down running three programs. Yes, I went throught the same process, I did get an OSK system, but still use my coco. Actually, the coco can multitask more smoothly than a rather high-end MS-Dos system. As an example, I log into a local BBS. It is operating a 486-40, I believe. I have no problem knowing when the Sysop is doing something. I will type 5 or so letters sometimes before they come back to me. Really spurty. When you think of the quality of OS9, or OSK, unless you truly need the compatibility, you can't go wrong staying with it. -- David Breeding -- CompuServe : 72330,2051 Delphi : DBREEDING *** Sent via CoCo-InfoXpress V1.01 *** ^^^^ ^^^^^^^^^^ -*- End of Thread. -*- 89092 5-AUG 02:09 System Modules (6809) RE: Smartwatch / Ken-ton Clock (Re: Msg 88970) From: BILL32H To: [ (NR) Let me see if I can make things more clear. I have: lr-tech (owl w/ 24 pin clock chip (("ST" MK48T02B-20)) (FF74 - FF7F) clock (FF70) Disto SC-II (28 pin rom ((cc3disk.alt)) (FF58 - FF5F) Standard But fixed /t2 (FF68 FF6B) Straped MPI 6309 1 meg The problem is that the lr-tech clock chip is run down.So I put a battery on the stupid thing now it runs at about 1/20th its normal speed ( Wrong battery from other chip) . Owl has the correct chip but it is OLD (I don't trust the battery).SO I need one of two things (Unless someone else has an idea). 1: A source for the above mentioned clock chip 2: A way to use a smartwatch with sc-ii and cc3disk.alt (FF58 - FF5F) Bill32h -*- 89123 6-AUG 00:31 System Modules (6809) RE: Smartwatch / Ken-ton Clock (Re: Msg 89092) From: COCOKIWI To: BILL32H (NR) there is a smartwatch for the Sc-II...I use one myself....also works with ADOS-3 Extended......it is a double plug/socket..eprom plugs in top....one problem crops up...the cover needs a hole cut in it,as the eprom and Smart watch now are too high.....talk to ART..here ...Dennis also there is an updated DISTO clock driver for the smartwatch in the database.... -*- End of Thread. -*- 89095 5-AUG 05:19 General Information OS-9 Dev. Pack. From: MMCCLELLAND To: ALL Does anybody out there have an OS-9 Development Package that they are willing to part with? I desperately need one! -=Mark=- (KE6JKS) Delphi:MMCCLELLAND -*- 89100 5-AUG 07:11 General Information RE: OS-9 Dev. Pack. (Re: Msg 89095) From: MROWEN01 To: MMCCLELLAND I don't have the Dev pack, but it's on my wish list. It's still available from Radio Shack via the consumer mail #. Ask the store if you can look at the consumer mail catalog. There has been a number posted here...I HAVE IT! ..Well this is the Express order line. It may get you there too. The number is 1-800-321-3133. I don't have a catalog number. I ordered TS-spell back in February for $11.54. The Dev pack may be pretty cheap these days too. If you do order it, please leave a note to me here. Thata way others will have the info. Tell them it's a CMC product when you call. That will notify them to look in the consumer mail catalog (CMC). Hope this helps. -Mike -*- End of Thread. -*- 89096 5-AUG 05:20 General Information sidewise and business software. From: ALAIN1155 To: ALL I am looking for a copy of the Sidewise software from Derringer along with Computerware small business software. They used to have a payroll, account receivable and account payable package. Anyone willing to upload me a copy of thse or sell them to me are welcome to respond Alain -*- 89098 5-AUG 06:57 General Information RE: CD-i == Way Cool... (Re: Msg 88840) From: MREGC To: BOISY Boisy, > Rebel Assault is "in the works" for CD-i! I hate to be the bearer of bad news. I noticed your arrival in one of the CD-i sigs on c-serve, but I believe you came in about 2-3 weeks too late for the discussion on Rebel Assault. Apparently, for several reasons, the only one of which that was detailed being that it wouldn't be ready for the upcomming Christmas season, the CD-i DV version of RA has been shelved "indefinitely". A LOT of people seemed unhappy about that. I really couldn't understand why. The only time I've seen the game was at Winter CES in Vegas, but I didn't think it was all that much. There must be much more to it than I saw. > I would *love* to see a CD-i disk with the old classic arcade games... I've seen a few people mention this, and it always surprises me how dedicated people are to those old games. If it would sell more players, I'd be all for it. Actually, though, the 2 best old classic arcade games are already on CD-i, Dragon's Lair and Space Ace! :) Frankly, I went to an arcade here 2 years ago willing to buy their old beat up arcade Space Ace machine for $700.00, so getting it on CD-i is like a dream, and all those other disks are just a bonus! You know its funny that I think this is probably the only CD-i discussion going on on Delphi. For awhile now I've been wondering why it doesn't have its own section here. Of course, its hard to beat C-Serve with several Philips people and a slew of CD-i developers online. ..Eric... -*- 89101 5-AUG 07:18 General Information RE: CD-i == Way Cool... (Re: Msg 88890) From: MREGC To: PHXKEN (NR) Ken, > I rent one here in Phoenix at a used video game store... What store here rents CD-i players? I have heard that there were 2 Blockbuster video stores that rent them, but I have no idea which 2 they're at. > They stated that the CD's were hard to find but I get mine at Incredible > Universe. That was true not so long ago, but since Incredible Universe came to town Best Buy has gotten better in their CD-i support, depending on which location you go to. Between the Superstition Springs and Scottsdale Pavillions locations I've found a considerable number of titles, plus the Scottsdale location now has the DV cartridge. > I have not yet seen the new cheaper Magnavox model... Service Merchandise on Southern is displaying it. In fact its the only model they stock. > Incredible Universe did not seem to have the Magnavox model... I was there this evening. They only had about 7 Philips 220's left. One of the pro-CD-i sales persons there told me they're selling about 2-3 per week. That is, compared to less than half as many 3DO players. (Did you notce they're offering 2 free disks just to get people to buy 3Do players?) > The CD-i seems to have 3 to 4 times the available software (than 3DO)... Either you haven't been there in awhile or you've been confused by the oversized 3DO software packaging. They've expanded the CD-i software area at the expense of area devoted to 3DO software. There are less than 15 3DO titles there, compared to at least 60-70 CD-i titles, (ok, maybe your 4 times figure is pretty close :) ). Incredible Universe does have it hands down for extent of CD-i support, but I would suggest looking into Best Buy a little more. You mentioned that you buy your disks from IU, but for the ones that are also available at Best Buy, Best Buy sells them for less, (and they were the people who were nice enough to extend me the considerable credit needed to get the 220, DV card and several titles!) :) ..Eric... -*- End of Thread. -*- 89099 5-AUG 07:00 General Information RE: Sears (Re: Msg 88871) From: MREGC To: BOISY > Well, I would be speaking to the manager about that. The Sears CD-i horror story doesn't surprise me at all. If I had to depend on my neighborhood sears for CD-i, I would never even give it a second look. Although it is usually running, the display is pitiful. They haven't updated their software list since 92. They don't even have titles out to test drive anymore. ..Eric... -*- 89111 5-AUG 22:22 General Information RE: Review of Microsoft Windows 4.0 -*- End of Thread. -*- 89116 5-AUG 23:25 Telecom (6809) RE: VT100 emulation (Re: Msg 89011) From: CPERRAULT To: JEVESTAL >>But the program, vt100 does support vt100 and vt220 etc, but it has no built-in features such as capture buffer ...<< Yeah, like I (think) I said, it isn't a full fledged program like SuperComm or KBcom, but is usuable, and would imagine it can be a pretty good package when combined with an autodialer and some transfer protocol programs. I know it doesn't go a long way towards our new "Complete and Userfriendly" trend, but does make a fun project :-) . >Chris< -*- 89119 5-AUG 23:25 General Information Conference From: CPERRAULT To: ALL Ok, I am starting to get replies as to WHEN the conference(s) should be held. Keep those coming(Thanks Jim and Bro. Jeremy). Now I just need more input on WHAT kind of conferences you want to have. I'm open to anything, including my own ideas :-) I need as much input as possible. >Chris< -*- 89120 5-AUG 23:25 General Information Old Monk, New Toy From: REVWCP To: ALL Dear friends: Once again from the depths of the obscure equipment and unknown hardware bin, I have managed to obtain an interesting piece of practical peripherality. (Hold on it will probably get worse.) I picked up an AVAL PKW 1000. Now what is an AVAL PKW 1000, you may ask? Go ahead, I'll wait while you ask. Funny you should ask, it is a self-contained EPROM programmer. It has a hex keyboard 0-F, and 8 commands keys: LOD RST ERS JOB PRG - CMP SET on a control panel about the size of a calculator. It is labeled a Pecker 10 Intelligent Programmer. To the right of the control panel is a socket adapter, about 3x5 inches labeled FX-1. It has a zero insertion force socket and will take either 24 or 28 pin eproms. It lists that it can program 2716 up to 27C256 eproms. The socket adapter is removable and other types of eproms could be used with the appropriate adapter. There is a Parallel I/O port connector and an RS-232 jack on the back. Overall, the unit is about one foot square and about 2-3 inches deep. It plugs into a standard outlet. Unfortunately, it did not come with any instructions. Has any one ever heard of the company? If so does any one know of where I might get an instruction manual? This is a real nice looking unit and the preliminary test that I have performed suggest that it is in working order. Now as much as I have never been one to let facts stand in the way of my making a decision, I would like to have at least a vague idea of how to use this piece of equipment. With all best wishes, Brother Jeremy, CSJW OS9 Users Group Treasurer -*- 89121 5-AUG 23:25 Programmers Den program update From: CPERRAULT To: DBREEDING I'm just bringing you up to date on what happened with the program since I last talked to you. I did change the command line to put the ',' between the two quoted parameters and it did return the filenames from the text file. Now my next problem was, it would return all those files, but keep returning them over in over again. What I was doing was, I had a for/next loop(which I probably didn't need since I was getting the names from a file, not keyboard) that kept count on the files coming in. Problem? It was on the OUTSIDE of my While/do/endwhile loop, instead of the inside! At least this one was a simple solution. The good news is, I'm just about done. I have one more bug to work out, which knock on wood, looks like I will have fixed today. Then I will just clean up the code and then change the parameter structure. I'm gonna make it so that instead of having to or three different variables, I'll combine them all into a complex data type, so they don't have to be seperated with commas. After that, I'll doc it up,LZH it and get it into the database so I can start on my next program. This is getting fun ;-) >Chris< -*- 89124 6-AUG 01:48 General Information IRQ Mod From: MMCCLELLAND To: ALL Hi everybody! I was about to perform the IRQ mod on my MPI, but I suddenly remembered s to this modification? I assume that it would render autoboot ROM Paks useless, unless a poke is used to manually start them. Correct me if i'm wrong. (I hope I am!) -=Mark=- (KE6JKS) Delphi:MMCCLELLAND -*- 89125 6-AUG 01:50 Applications (6809) Word processor From: MMCCLELLAND To: ALL Does anybody know of a word processor for OS-9 that is up to par with Max-10? Is there really going to be an OS-9 port of Max-10? -=Mark=- -*- 89127 6-AUG 04:06 Applications (6809) RE: Word processor (Re: Msg 89125) From: ISC To: MMCCLELLAND (NR) Mark, Brother Jeremy has received permission to port Max-10 to OS-9. He also has the source code. It will take time, but the port will probably happen. At this time, the best word processor for OS-9 is probably Dynastar, but I don't think it is available commercially anymore from Frank Hogg. However, maybe someone here will sell you a copy. Alternatively, there are many text editors available in the data base, and they can be integrated with WPShel available from COLORSYSTEMS here. In doing that, you add a spell checker and a viewer and a text formatter and you will have your own full-fleged word processor. Bill -*- 89129 6-AUG 14:10 Applications (6809) RE: Word processor (Re: Msg 89125) From: REVWCP To: MMCCLELLAND (NR) Dear Mark: This past spring I requested and received the source code for MAX-10 from Dave Stampe. I have given the code to a team of five programmers and they are working on the project. I hope to have a formal notice out about the progress of the port at the end of August. With all best wishes, Brother Jeremy, CSJW OS9 User's Group Treasurer -*- End of Thread. -*- FORUM>Reply, Add, Read, "?" or Exit>