read new nonstop follow 90839 29-NOV 00:05 System Modules (6809) RE: TESTCLOCK (Re: Msg 90835) From: WDTV5 To: DONALDS Yup, thats the blob allright. Try the idea I just wrote up in your mailbox. It assumes you have ezgen though. If not, then you'll have to dEd it using the 'd'iddle function, and os9gen a new one that way. Slower, but it should work. Just don't forget to 'v' after you 'd'iddle it one byte longer each time. For that, I think I'd make 4 copies, each a byte longer and just edit the os9gen file(source list). Cheers, Gene -*- 90848 30-NOV 00:46 System Modules (6809) RE: TESTCLOCK (Re: Msg 90825) From: MIKE_GUZZI To: WDTV5 (NR) yes RBF 33 is working great. I had formatted the drives 8 sector clusters prior to that and used edition 28 of RBF. for some reason with the older RBF the second hard disk had a megaread of 28 seconds even though the two hard disks are identical. with RBF 33 both are down to 18 seconds -*- 90850 30-NOV 00:47 System Modules (6809) RE: TESTCLOCK (Re: Msg 90836) From: MIKE_GUZZI To: DONALDS yes the new RBF 33 is here in the new uploads area -*- 90854 30-NOV 08:55 System Modules (6809) RE: TESTCLOCK (Re: Msg 90850) From: DONALDS To: MIKE_GUZZI (NR) Thanks Mike; I will Dl it this session. Don -*- End of Thread. -*- 90840 29-NOV 01:17 Programmers Den RE: _gs_rdy() Question (Re: Msg 90827) From: NIMITZ To: EDELMAR Good point re: MW support. Though pricing still makes that difficult for low volume dealers. BTW - The GNU Lib 1.08 still seems to be substantially more lenient than the earlier licenses. Granted, it was a quick reading, but other options are of course, available..... It might be that we need to discuss means of making MW products more available to the smaller companies that have a hard time spending $50,000 to buy Ultra C......... -*- 90841 29-NOV 05:48 Programmers Den RE: _gs_rdy() Question (Re: Msg 90840) From: EDELMAR To: NIMITZ > BTW - The GNU Lib 1.08 still seems to be substantially more lenient than > the earlier licenses. My local attorney knows zilch about copyright law. But he uses a correspond- ing attorney in Washington, D.C. who is supposed to be one of the leading experts in the country re copyright law and how it applies to software. He sends out updates to his clients periodically regarding matters which may effect them. In his July letter, he had a short paragraph which covered the GNU license. He reiterated his earlier advise against using GNU soft- ware in any form for commercial software products unless a license was obtained from them. To summarize his advice when we originally asked several years ago, he said he would not want to defend anyone the GNU people brought suit against for violating their terms. It would seem to me, that you would need a letter from them specifically permitting you to use their software for commercial purposes. > It might be that we need to discuss means of making MW products more > available to the smaller companies that have a hard time spending $50,000 > to buy Ultra C......... $50,000 ????? Who gave you that figure? Even if you negotiated a new OEM license with MW for OS-9 and added Ultra-C, I doubt the initial invest- ment would exceed one tenth of that figure - and this would include a new port-pack. I think you need to do some serious talking to your MW sales rep. MW does not have any 'official' distribution channels in the US other than direct sales from them. (Not talking about OEMs.) However, they do offer discounts to certain resellers (or distributors, dealers, etc. - whatever you want to call them) for resale. I don't know how many there are but there are several around the country. I'm one of them. You might want to investigate that route. Granted, many developers may complain about the $1295 retail price of Ultra-C, but consider the pricing in the MSDOS market. While there are compilers available for a few hundred dollars (Microsoft, Borland, etc.) most serious developers use the Watcom or comparable compiler. This compiler starts at over $1000 and the full blown package will run several thousand dollars. (I know because I had to buy one for a project I'm working on for a customer.) Decent compilers for Unix also run a thousand dollars or more. So, MW's price isn't out of line. Indeed, I think it's pretty low. (Don't tell MW I said that .) You may have one other option if you took over IMS' license. Renegotiate with MW to add Ultra-C. Your costs should be substantially less than what I have to pay as a re-seller. For example, I can offer Ultra-C to SYSTEM IV and V customers for only $300.00. I don't get Ultra-C from MW for these customers; rather, I get it from the OEM, Peripheral Technology. Other customers have to pay the full price because I have to get Ultra-C directly from MW. Of course, whatever path you take, it's your decision (and risk). Ed Gresick - DELMAR CO -*- 90842 29-NOV 15:10 Programmers Den RE: _gs_rdy() Question (Re: Msg 90841) From: GREGL To: EDELMAR > Granted, many developers may complain about the $1295 retail price of Ultra-C, > but consider the pricing in the MSDOS market. While there are compilers > available for a few hundred dollars (Microsoft, Borland, etc.) most serious > developers use the Watcom or comparable compiler. This compiler starts at > over $1000 and the full blown package will run several thousand dollars. (I > know because I had to buy one for a project I'm working on for a customer.) > Decent compilers for Unix also run a thousand dollars or more. So, MW's price > isn't out of line. Indeed, I think it's pretty low. (Don't tell MW I said > that .) I doubt the validity of this statement because the majority of the commercial software I have seen has been compiled with either a Microsoft or Borland compiler. Aldus Pagemaker and Collage Complete, for example, are compiled with Microsoft C. Of course, a notable exception is that the Norton products (Norton Commander, Norton Utilities, Norton Desktop, etc.) appear to be compiled with the Symantec compiler. Determining which compiler is used is pretty trivial if you peek at the executable. Borland compilers, for example, include a copyright notice at the head of the libraries while Microsoft compilers typically have a bunch of idiotic run-time error codes starting with the letter R (R6000 - stack overflow, R6003 - integer divide by zero, etc.). The Watcom compiler appears to be used mostly in proprietary embedded systems and, I believe, for writing NetWare software. Still, I conclude that the vast majority of commercial applications for MS-DOS and Windows are compiled with Borland or Microsoft compilers. -- Greg -*- 90853 30-NOV 04:57 Programmers Den RE: _gs_rdy() Question (Re: Msg 90842) From: EDELMAR To: GREGL > I doubt the validity of this statement because the majority of the > commercial software I have seen has been compiled with either a Microsoft > or Borland compiler. Aldus Pagemaker and Collage Complete, for example, > are compiled with Microsoft C. ... The Watcom compiler appears to > be used mostly in proprietary embedded systems and, I believe, for writing > NetWare software. Still, I conclude that the vast majority of commercial > applications for MS-DOS and Windows are compiled with Borland or Microsoft > compilers. You are probably right. You're far more knowledgeable in this area than me. My info came from my client who does only proprietary, industrial stuff. Since they're paying the bills and want only the Watcom Compiler used (they swear by it), who am I to argue. BTW, my association with them started while they were still providing solutions running OS-9 on VME boxes. About 3 or 4 years ago, competition forced them to look for other solutions. They found it was more cost effective to use multiple 386/486 boards. (OS9000 hadn't been released yet.) Recently, I showed them OS9000. They liked it and assigned one man to look into it. The project got shelved because of the amount of software already out and the cost involved to convert. They stated that if they ever got into a situation where the competition was breathing down their necks again, they would seriously consider converting. They said they would re-evaluate when PowerPC boxes become available since they would probably have to rewrite much of their code anyway. Ed -*- 90855 30-NOV 15:43 Programmers Den RE: _gs_rdy() Question (Re: Msg 90853) From: GREGL To: EDELMAR (NR) That makes sense to me, Ed. If I remember my history correctly, Watcom is one of the few compilers available for embedded systems. I think it can also general ROMable code -- either out of the box or with an option. I received an evaluation copy of MetaWare High C/C++ that touted 32-bit compatibility, embedded systems and such. Unfortunately this rather high-priced compiler requires PharLap's 32-bit DOS extender to run (another $500 or so). If I were involved with embedded systems, I think I'd go with the Watcom compiler as well. For strict DOS and Windows applications, Borland C++ and Visual C++ are the compilers of choice. In my opinion, Borland has a much better package -- Microsoft C through version 7.0 were the pits. Visual C++ isn't necessarily so bad, but it isn't integrated nearly as well (Windows editor, DOS-hosted compilers) and the current versions won't generate 16-bit Windows code. -- Greg -*- End of Thread. -*- 90843 29-NOV 20:47 General Information RE: Chicago CoCo-Fest (Re: Msg 90807) From: THESCHU To: DISTO don't let the 2-meg go any where I placing my order now. later brian -*- 90858 30-NOV 20:10 General Information RE: Chicago CoCo-Fest (Re: Msg 90843) From: DISTO To: THESCHU (NR) OK, I'll keep one for you. -Tony. -*- End of Thread. -*- 90844 29-NOV 22:43 General Information HardDrive From: REVWCP To: ALL Dear Friends: I am trying to help out a friend who needs to obtain a 20-30 meg MFM 5-1/4" half-height hard drive. Something like an St-225 or St-238 would be fine. Please let me know price and shipping terms. :::::::::::::::::::::::::::::::::::::::::::::::::::: :: With all best wishes, :::::: 2 Kings 2:23-24 ::: :: Brother Jeremy, CSJW ::::::::::::::::::::::::::: :: OS9 Users Group Treasurer :: revwcp@delphi.com :: :::::::::::::::::::::::::::::::: CIS - 76477,142 ::: :::::::::::::::::::::::::::::::::::::::::::::::::::: -*- 90859 30-NOV 21:02 General Information RE: HardDrive (Re: Msg 90844) From: MRGOOD To: REVWCP I have an ST-225 installed in a full height case with power supply. Does $45 sound reasonable? I'd like to get rid of it since I sold the Coco a while ago. Hugo -*- End of Thread. -*- 90845 29-NOV 23:56 Applications (6809) RE: 8-bit chips (Re: Msg 90778) From: AJMLFCO To: GLOCKR I don't see much 6809 equipment other than the CoCo for sale. Gespac may still sell a 6809 board or two. Another industrial manufacturer is XYZ which, I believe , makes STD-bus 6809 boards. Another lead might be as close as your local electrical distributor. Honeywell still makes an sells a 6809 computer with OS9 level one for controls. The 'MiniCop' module has two or three serial ports and plugs into a programmable logic controller chassis. You could probably buy a Kix\20 cheaper than one of those. If you ask, though, some of the distributors may still have one of the older, larger' "cop" computers left around on the shelf that they may be glad to dispose of. These also ran OS9 level one and had up to 8 serial ports (6850 ACIA). We have programmed several of these systems for use in our plant. It's pretty difficult to find any OS9 in industry anymore. Most everything is done on the PC anymore, with it's nice graphical interface (Windoz) using packages like "Wonderware", "Intellution", "Genisis", etc. Allen -*- 90846 30-NOV 00:05 General Information RE: New CD-i Stuff (Re: Msg 90784) From: AJMLFCO To: BOISY I was in a small town shopping mall last weekend and I noticed a Sears catalog order store. They had two CD-I machines set up for demo purposes and I found out that Sears is selling CD-I titles via mail order. The number is 1-800 317-4CDI (4234). The salesman was quite enthusiastic and knowledgable! The CD-I machines were the only consumer "game" machines in the store. Allen -*- 90847 30-NOV 00:44 General Information RE: mini expansion bus (Re: Msg 90812) From: MIKE_GUZZI To: WAYNETHOMPSO (NR) yes, after decoding the internal PIA's, the ghost areas will be free for use by another PIA Mike -*- 90849 30-NOV 00:47 General Information RE: mini expansion bus (Re: Msg 90831) From: MIKE_GUZZI To: COCOKIWI (NR) Yes from my experimation i found the CoCo3's internal PIA's are done a bit better then the CoCo1 or 2. They only ghost 4 times verses 8. -*- End of Thread. -*- 90851 30-NOV 00:48 General Information RE: My cursor!? Those darned dots! (Re: Msg 90817) From: MIKE_GUZZI To: 01GEN40 (NR) I haven't done any clock crystal changes but i do know that it will effect the video screen . -*- 90856 30-NOV 19:21 General Information RE: My cursor!? Those darned dots! (Re: Msg 90817) From: RICKULAND To: 01GEN40 (NR) It's not that easy to speed up a CoCo. The GIME is the first problem- it will crap out right around 2MHz. It's not even ugly (some chips, you can strap on a heatsink and push). But a simple design like CoCo has some other serious flaws. One clock, buss at cpu speed, so the PIAs have to be changed, some of the gates will be to slow, the traces are too long, and the MultiPak may catch on fire (ducking). The video goes nuts, as well. With market and a new GIME, a sweet little hitchi (they sell 6821s in QFP 1/2 inch square) board could be made pretty cheap, and running embedded OS9+Nitros9 would make a _very_ fancy controller/profit_motive- kind of like plugging a Burke&Burke in the wrong end of an MPI. Alas, we have neither. -ricku Rick Ulland CoNect rickuland@delphi.com 449 South 90th St. "Operating System Nine"- 268m Milwaukee WI 53214 -*- 90857 30-NOV 19:22 General Information RE: My cursor!? Those darned dots! (Re: Msg 90815) From: RICKULAND To: 01GEN40 (NR) The display codes do exactly as you suspect- but the coco color system has some weirdness. For example, reverse video (at least here) moves back color to fore, and cursor to back, then the cursor appears as back color. Except, the cursor doesn't change color until the screen is cleared. Same when it's flipped back to normal. There are lots of permutations here- for example, if you reverse, write some stuff, then swap back, the cursor is fine. Add a cls during the reversed part, and the cursor disappears later, when you unswap. (Until you cls the unswapped screen). If you'd like to experiment, try display 1f 20 (reverse) and display 1f 21 (back to normal) along with display c (clear), using your version of the color set.... PS- This is where any user can get some use out of MultiVue. 'Control' is an excellent little utility, and ran on a 16 color screen not only displays all 16, but allows adjustment by setting the red, green, and blue values- no weird color numbers! 'control -e' in startup makes these changes (and others, like keybd speed) systemwide, without running MultiVue. Until I got a decent hard drive, this and save were the only things I ever used from my $40 binder. -ricku Rick Ulland CoNect rickuland@delphi.com 449 South 90th St. "Operating System Nine"- 268m Milwaukee WI 53214 -*- End of Thread. -*- 90852 30-NOV 00:50 System Modules (6809) RE: boots (Re: Msg 90822) From: MIKE_GUZZI To: RICKULAND Did you remember to have GrfDrv in the CMDS dir of the boot disk? that will cause a boot to fail. Since you mentioned a 1 meg upgrade the modules will need to be fixed for 1 meg (grfdrv and os9p1 i think) you might be using an older version -*- FORUM>Reply, Add, Read, "?" or Exit>